E-mail:
13771798057@163.com
Metal Processing ComputerNumerical Control
Product Introduction：
Applicable to 3C electronics,new energy vehicles,automation,medicaldevices, Aerospace,precislon parts and other demanding produrcts machining
High Speed
The combination of mechanical andelectrical superiority enables highspeed operation.
High Efficiency
Equipped with imported servo tool magazine,it is faster for change tools.and can realize higher machining efficiency.
High Precision
Imported high-precision transmission system Feed speed of the equipment can reach 48m/min.Faster operation and greater precision.
High Stability
Using HT300 precision resin sandcastings.Ensures the stability of themachine tool for long-term operation.
Product Performance：
Precision resin sand casting
• The castings are made of HT300 precision resin sand casting,which is not easy to be deformed by long time use and can ensure the stability of the machine tool.
Highly integrated intelligent electric panel
• It has the advantages of stronganti-interference,low failure rate,high reliability,and high operationsafety factor
Advanced intelligent CNC system
• They adopt wel-known systems such as Japan ANUC-OH-MF,Japan Mitsubishi,Taiwan SYNTEC and Hua Zhong system.These systems are a modular structure control board highly integrated,with high relabltyand simple and convenient operations.
Domestic and international brand spindles
• They adopt famous domestic and international brand spindles,which have the advantages of high reliability,low noise, low vibration and high precision etc.
High-speed servo tool magazine
Guide RailLead Screw
Configuration of the Machine Tool：
●Control System:Japan FANUC-0LF Plus digital controlsystem.
(Japan Mitsubishi,Taiwan SYNTEC,Hua Zhong systems are all optional)
●Three-axis Drive Motors:fully digital servo motors.
●Spindle Motor:full digital servo spindle motor.
●Spindle:Taiwan DEJO/ABIG/ROYAL/T&D/ABIG/DEJO 20000rmp spindle.
●Automatic Lubrication and Lubrication Alarm
●Device:HERG/Shengxiang/BIJUR/BAOTN.
●Transmission System:Taiwan HIWIN/PMI P4 precision grade linear guide rails, C3 precision grade lead screws.
●Bearing:Japan NSK/Germany FAG/Switzerland SKF bearings,P4 grade.
●Electric cabinet:Heat exchange thermostat system for electric cabinets.
●Manual Pulse Generator(MPG);handheld electronic MPG from Japan.
●Coupling:NOBENGR or Germany R+W
●Cooling pump:Duyang
●Body:Resin sand precision body.
●Tool Magazine:Clamping arm type BT30-21T servo tool magazine.
Technical Parameters：
Item
Unit
DY-T600
DY-T700
DY-T1100
DY-T2000
Size of worktabl
mm
600
700
1100
2000
Worktable left and right travel (X direction）
mm
600
700
1100
2000
Worktable front and rear travel (Y direction)
mm
400
400
500
600
Machine head up and down travel (Z direction)
mm
300
350
420
450
Worktable T-slot（width*number of slots'spacing)
mm
3-14×120
3-14×120
5-18×105
5×18-102/82
Maximum load of worktabl
kg
250
300
600
600
Distance from spindle end face to worktable surface
mm
155-455
120-470
120-540
120-570
Distance from spindle center to guide rail of thecolumn
mm
450
420
556
670
Spindle taper hole
BT30
BT30
BT30
BT30
Tool magazine
PCS
21
21
21
21
Positioning Accuracy
mm
±0.005
±0.005
±0.005
±0.005
Repeating Positioning Accurag
mm
±0.003
±0.005
±0.005
±0.005
Feed speed （X/Y/Z）
m/min
48/48/48
48/48/48
36/36/24
36/36/24
Maximum speed of spindle
rpm
20000/24000
20000/24000
20000/24000
20000/24000
Spindle drive motor
KW
3.7
3.7
3.7
3.7
Weight of the whole machine (approx.)
T
2.7
3
4.5
7.0
Dimensions of optical machine approx.(L×W×H)
mm
1790×2370×2140
1900×2640×2140
2820×2040×2320
4700×3100×2450
Previous article:EBW V9 Series
Next Post:Vertical Machining Center (Three Line Rail Series)
Address:No.225 Su Hong Road,
Suzhou Industrial Park, Suzhou, China
Tel:+86 13771798057
Website:www.pufanxin.com
E-mail:13771798057@163.com
Culture:
Integrity, Diligence, Innovation
Philosophy:
Openness, Inclusiveness, Development
Copyright © Goodwill Industrial Equipment (Suzhou) Co., Ltd. All Right Reserved
